 |
| A Techtom MDM-100 Multi-Display Monitor enables the driver
to view a number of engine/sensor parameters in real time via the ECU. The MDM-100 allows
viewing of two parameters simultaneously and is a view-only proposition that does not
adjust the ECU. |
| Functions of Techtom MDM-100 |
| Screen Display |
Parameter |
Unit Measured |
| SPD |
Speed |
MPH/KPH |
| RPM |
Engine RPM |
RPM |
| AFM1, AFM2 |
Air Flow Meter |
Voltage |
| INJ1, INJ2 |
Injector Open Time |
Milliseconds |
| IGN |
Ignition Timing |
Degrees |
| WTEMP |
Water Temperature |
Fahrenheit |
| ITEMP |
Intake Air Temperature |
Fahrenheit |
| BATT |
Battery |
Voltage |
| THP |
Throttle Position Sensor |
Voltage |
| O2S1, O2S2 |
O2 Sensor |
Voltage |
| O2-1, O2-2 |
O2 Sensor Condition |
Lean/Rich |
| IDL-SW |
Idle Switch |
On/Off |
| NTL-SW |
Neutral Switch |
On/Off |
| POWERST-SW |
Power Steering Switch |
On/Off |
| AIRCON-SW |
A/C Switch |
On/Off |
|
|
